Unfortunately, because your browser version is too low to get the best browsing experience, it is recommended to download and install Google Chrome!
The monitoring of temperature and humidity and harmful gases in pig farming is a key monitoring project in modern animal husbandry. During pig breeding, different breeds and different growth periods of the same breed have roughly different requirements for the temperature and humidity in the environment; the requirements for the concentration of harmful gases do not change much.
In the pig breeding process, suitable temperature ranges for different types of pigs are about the following categories: suckling piglets: 29-33 ° C; suckling sows: 20-22 ° C; breeding boars: 17-21 ° C; fattening pigs: 19-22 ° C. Of course, this is only an approximate data statistic. The specific temperature and humidity control depends on the actual invitation of the breeding. The temperature is the key.
If they are experienced managers, they will have a general understanding of the growth temperature and humidity of pigs at all stages. Generally, the main methods for temperature and humidity control are: summer ventilation, cooling, spraying, winter heating and heating, and good breeders must register the temperature and humidity values in the pigsty and herd environment under their control every day, and do a good job. Archival records are archived for later viewing and environmental control.
After using the pig temperature and humidity monitoring system , the breeder no longer needs to query and record data at intervals. The data and video monitoring information can be viewed directly from the data center of the temperature and humidity monitoring system . Under the monitoring of the pig temperature and humidity monitoring system , accurate data collection, controllable collection intervals, and undistorted data transmission allow pig farm staff to control the temperature and humidity values in the environment. Under the automatic control of the pig breeding temperature and humidity monitoring system , the staff only needs to set the upper and lower limits of the temperature and humidity monitoring, and then can automatically control the temperature and humidity changes in the pig house. response.
Then, in the process of pig breeding, in addition to the temperature and humidity monitoring system that needs monitoring and control equipment to solve the changes in temperature and humidity, the staff must control the temperature and humidity through some of their own work. such as:
1. Clean up the manure in the pig house in time, so as to maintain good air quality and reduce the heat released and absorbed by the decomposition of pig manure;
2. Try not to rinse with water when cleaning feces, reduce the chance of increasing humidity;
3. Observe the specific conditions of the herd (such as sleeping position, feeding) to determine whether the temperature and humidity are appropriate;
4, do a good job of ventilation;
5, to prevent thieves and summer heat.
Appropriate pig house temperature is the basis for the healthy growth of pigs. Temperature and humidity management of pig houses is the basic management of pig breeding.
The pig breeding temperature and humidity monitoring system can realize the automatic collection and monitoring of temperature, humidity, and other parameters of each point of the pig house through the on-site detector and transmission center. Then through the temperature and humidity control center can achieve automatic control of heating, dehumidification, ventilation, and so on.
May 20, 2016
Chengdu Xinxin Electronic Technology Co., Ltd. Editorial Department
Editor: Little Devil in Gourd